Product
Flow Inducers
The flow inducer controls the water flow in the tank. The right current gives a self cleaning tank, even water quality and fish swimming against a stable counter current.
Polyethylene (PE). Dimensions Ø160 to 1200 mm.
Benefits
Self cleaning tank
The rotation carries feed residue and particles towards the centre drain, so the tank stays clean with less manual work.
Even oxygen in the whole tank
The water is distributed over the full depth, so there are no zones with low oxygen or stagnant water.
Current adapted to the fish
The current can be adjusted to fish size and density, so the fish get the right counter current throughout production.
Lower lifetime cost
PE can be welded and repaired on site. Flow inducers in fibreglass usually have to be replaced when damaged.
Technical information
- Row of holes over the full depth. The water exits through holes along the whole pipe. This gives a more even flow pattern than inlets with a single outlet.
- Rotatable outer pipe. The direction of the jets can be changed after the flow inducer is in operation.
- Pneumatic damper. The damper increases the pressure through the holes when the tank needs more current, for example at high density.
- Sized for the tank. Diameter and length are adapted to the size, depth and water volume of the tank.
- Two flow inducers on large tanks. The largest tanks get two flow inducers to keep the rotation even in the whole tank.
- Installation. Flanged to the inlet pipe, sleeve mounted to the tank floor.
Need a custom solution?
All our products are adapted to the facility. Tell us about your project, and one of our engineers will get in touch.
Contact us →
